---
title: "Set up Zebra ZD410 for sticker printing"
slug: "set-up-zebra-zd410-for-sticker-printing"
updated: 2026-06-16T13:01:00Z
published: 2026-06-16T18:47:11Z
canonical: "mysupport.roller.software/set-up-zebra-zd410-for-sticker-printing"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://mysupport.roller.software/llms.txt
> Use this file to discover all available pages before exploring further.

# Set up Zebra ZD410 for sticker printing

## Introduction

Use this guide to install a Zebra ZD410 label printer and print sticker tickets from ROLLER Point of Sale (POS).

## Requirements

- A Zebra ZD410 printer with power supply and USB cable
- Windows 10 or Windows 11 computer with administrator access
- Sticker media loaded in the printer
- [ROLLER Connect installed](/v1/docs/install-roller-connect) and the POS device signed in

## Install the printer and driver in Windows

1. Load the sticker roll in the ZD410 and close the cover.
2. Power on the printer.
3. Connect the printer to the computer by USB. Allow Windows to detect the device.
4. Install the Zebra driver using one of the options below:
  1. If prompted by Windows, choose the **ZDesigner** driver for **Zebra ZD410**.
  2. If you have Zebra Setup Utilities, open it, select **Install Printer**, choose **ZD410**, and complete the wizard. This will install the ZDesigner driver.
  3. Open Settings then Bluetooth & devices then Printers & scanners. Select the Zebra ZD410 entry, choose Printer properties, then select Print Test Page. Confirm the test page prints correctly.
5. Calibrate the media so the printer detects the sticker length and black marks:
  1. In **Zebra Setup Utilities**, select the ZD410 then **Open Printer Tools** then select **Calibrate Media**. The printer will feed a few stickers and stop when calibration is complete.

> [!WARNING]
> If Windows installed a “Generic” or non‑Zebra driver, reinstall using Zebra Setup Utilities so you can access all print settings.

## Configure products for sticker printing

For each **session product** you want to print as a sticker ticket:

1. Edit the product configuration and scroll to **Advanced settings**.
2. Under **Alternate ticket printing**, tick **This product uses alternate ticket printer**.
3. Select **Save**.

> [!WARNING]
> Sticker printing is only supported for **session passes**. Do not enable alternate ticket printing for **standard passes**. ROLLER Connect will stop working if you try to print a sticker for a standard pass.

## Set Windows printing defaults for the sticker printer

1. Confirm you can print a Windows test page as in step 1.
2. Go to **Settings** then **Bluetooth & devices** then **Printers & scanners**. Turn **Allow Windows to manage my default printer** **off**.
3. Select your sticker printer entry then choose **Printer properties** and select **Change properties**.
4. Open the **Advanced** tab and choose **Printing defaults**.
5. In the **Options** tab set:
  - **Paper format**: **mm**
  - **Orientation**: **Landscape** if your stickers match the left image example, **Portrait** if they match the right image example ![A paper on a printer AI-generated content may be incorrect.](https://cdn.us.document360.io/23700755-951c-4b69-8afe-ec8b33c6c689/Images/Documentation/14560031811343.png)
  - **Size**: **Width 63** and **Length 123**
  - **Settings**: **Speed 76 mm/s**, **Darkness 7**
  - **Stock**: **User defined** ![A screenshot of a computer screen AI-generated content may be incorrect.](https://cdn.us.document360.io/23700755-951c-4b69-8afe-ec8b33c6c689/Images/Documentation/14560031811599.png)
6. Select **Apply**, then open the **Advanced setup** tab and set:
  - **Media type**: **Thermal direct**
  - **Tracking mode**: **Mark sensing** ![A screenshot of a computer AI-generated content may be incorrect.](https://cdn.us.document360.io/23700755-951c-4b69-8afe-ec8b33c6c689/Images/Documentation/14560031811983.png)
7. Select **Apply** again and close the dialogs.
8. From the **Printers & scanners** screen, select **Printing preferences** for the sticker printer. Confirm the values match the defaults you set. If they do not match, update the preferences to match the defaults, then **Save**.

## Test print a sticker

1. Create a complimentary booking for a session product that is set to use the alternate ticket printer.
2. Attach a waiver to the booking.
3. Select the printer icon to print a sticker.
4. Confirm the sticker prints correctly and margins are aligned.

## Learn More

- [Get started with cloud printing](/v1/docs/get-started-with-cloud-printing)
- [Configure printers for cloud printing](/v1/docs/configure-printers-for-cloud-printing)

## Related

- [Configure printers for cloud printing](/configure-printers-for-cloud-printing.md)
- [Get started with cloud printing](/get-started-with-cloud-printing.md)
- [Enable local network access in Chrome to resolve ROLLER Connect Issue](/enable-local-network-access-in-chrome-to-resolve-roller-connect-issue.md)
- [Sticker ticket printing fact sheet](/sticker-ticket-printing-fact-sheet.md)
- [Wristband printing FAQs](/wristband-printing-faqs.md)